B-960 MoIP Receiver (B-960-4K-RX)

  1. Power indicator — On: Powered on | Blinking: Starting up | Off: Powered off.

  2. System status light — On: Connected to network and detecting a source | Off: Does not detect a network connection| Blinking: Detects a network connection but not a source.

  3. USB Reserved — For future use.

  4. USB HID — Output for Human Interface Devices (HID), such as a mouse or keyboard.

  5. Reset — Press and hold for 10 seconds to restore to factory settings.

  6. 12V 2A power connection — Optional 12VDC 3A locking connection for external power supply (not included).

  7. IR Receiver — 3.5 mm mini mono/stereo for external receivers.

  8. IR Flasher — 3.5 mm mini mono output to IR emitter.

  9. HDMI In/Out — HDMI output. HDMI input is not yet available.

  10. 10GbE Network port — Provides access to the network and Power-over-Ethernet (PoE). B-960 configurations must use an Araknis 920 switch. Read MoIP configuration for AN-920 Edge switches for more information.

  11. SPDIF In — SPDIF input.

  12. RS-232 — RJ45, RS-232, (TX, RX, Ground), EIA-561 pinout

  13. Network — Provides network access to a connected device.

  14. 3.5 mm Input — Analog audio embedding to replace HDMI audio.

  15. L/R Audio Out — RCA analog audio de-embedding of 2-channel PCM audio.